Search " PROBLEMGO.COM Looking to pay for a get out of jail free card Davao Prison and Penal Farm"

20th Century
Of typical form with outer bentwood edge, 126cm wide

Second Quarter 20th Century
Planked with brass pins and details, lead weighted keel, single mast and replacement sail canvas (original present and made to scale by Bassett- Lowke), on presentation…

Works by John Russell, Falkirk, circa 1800
The arched pediment with a cartouche-form crest and scrollwork frieze enclosing a gilt and silvered face, above a case with stop fluted corner columns, over…

18th Century
The case with cutwork dolphins decoration and incised scrolls to the dial, 25cm high

20th Century
An oak cased clock, with cream dial inscribed ‘H.F. SEALE CAPE TOWN’, with pendulum, 45cm diam.; Together with another drop dial clock with mother-of-pearl inset case, with pendulum,…

Late 20th Century
Mounted in an oak case with cream dial, 39cm diam.; Together with a clock by Fortune, Lodsworth, 56cm high, and an example by Harvey, Wellington, 49cm high, each with pendulum, one…

20th Century
With 7in. Silvered dial inscribed ‘Tempus Fugit’, flanked either side by fluted pilaster corners, with arched pediment and cutwork panels to the sides, 170cm high

19th Century
The rectangular base inscribed ‘PEASE & PARTNERS LIMITED’ and ‘J,W, PEASE ESQ’, 42cm wide

Circa 1880
Comprising a brass three-arm proportional divider by Potter Poultry with rotating vernier scale, in blue velvet-lined mahogany case; a station pointer by Elliott Bros, Strand London, with…

Dated 1943 and 1965 respectively
The first by Henry Hughes & Son Ltd (HUSUN), No. 35470, a 6-inch micrometer sextant in green baize-lined mahogany case with inspection certificate dated 22.7.43;…

20th Century
Including a prismatic compass by Troughton & Simms, London, no. 5524, with leather case; a large brass surveyor’s compass by T. Cooke & Sons Ltd, London, York & Capetown,…

Mid 20th Century
The eight spoked wheel with brass reinforcing ring and brass central drum, 124cm diam including handles

Modern
With rigging, sails, cannons and label to the stern ‘HMS PRINCESS WALES’, 122cm wide; 100cm high: Together with a model of a 19th Century Clipper, on stand, 71cm wide

19th Century
The crystal swags surmounted by an acanthus cast corona and waisted by a central band, issuing three three-branch arms from bows and floral swags, with six lights within basket issuing…

20th Century
Interlined and weighted, with three pelmets, 164cm bottom edge x 80cm top edge x 220cm high, approximately; 224 cm bottom edge x 102cm top edge x 208cm high, approx.; And a single; …

20th Century
With pleated edges and stiff single pleated top with braid and tassel swags, 104cm top edge; 230cm long bottom edge; 234cm high, approximately; together with a pair of matching side…

Circa 1919
Bearing identification stamps indicating British Air Ministry registration, 270cm wide

1920
Each blade with brass capped tips, leading edge pinned with scalloped brass strips, the boss stamped OCM No.73 OCM and dated 20.6.927, also stamped CA73 ASSO 500 Diam 295 PAS 17 194 DIS 014,…

1930’s
Laminated mahogany with capped tips, 358cm long

1932
The propeller with markings to suggest it was fitted to a Bristol Mercury IV S.2 Radial cooled aircraft engine, dated May 1932, with brass leading edge covers, 306cm long

Dated 1933
With gold painted tips, inscribed with registration numbers and 'CHEETAH X', 224cm long

Early 20th Century
The blades made from twisted bands of wood, with eight stud fitting holes to the centre, 248cm wide

20th Century
Cast iron plate with raised lettering ‘G.K. & N.L, for Guest Keen and Nettlefolds, No.6’ on a red-painted ground, 59cm wide. Likely dating from the early 20th century, a works plate…

20th Century
Painted black with age-worn surface, rusting and remnants of old adhesive. Beckett & Sons were known builders of industrial locomotives and stationary engines. No. 2072 likely…